If you’re looking to save space in your home but still have a place to sleep, consider making your own Murphy bed. Named after inventor William L. Murphy, Murphy beds fold out of the wall, providing you with sleeping space during the day and wall space at night when it’s time to sleep. If you have some basic construction skills and an afternoon, you can make one of these beds too! Follow these steps below to get started.
What You Will Need
A Murphy bed, also known as a wall bed, is a great way to save space in your home. But before you can start enjoying the extra space, you need to build the bed! Here’s what you’ll need to get started:
- A wall bed frame
- A mattress
- A drill
Choose the Right Area
The first step to making a murphy bed is finding the right area in your home. You’ll want to choose a spot that’s out of the way, but still easily accessible. Once you’ve found the perfect spot, clear away any furniture or obstacles that might be in the way.
Measure and Cut Your Materials
The first step is to measure and cut your materials. You will need four pieces of wood for the frame, two for the headboard, and two for the footboard. The dimensions will depend on the size of your mattress. Once you have all of your pieces cut, you can move on to assembling the frame. slowfoodmaresme
Complete Final Assembly
With the bed frame complete, it’s time for final assembly. Position the assembled frame against the wall where the bed will be installed. Make sure the frame is level and square, then use a drill to screw the included L-brackets into the studs in the wall. Next, attach the murphy bed hardware to the underside of the bed frame using screws and washers (following the manufacturer’s instructions). Finally, add any optional trim or molding to give your murphy bed a finished look.
Install Curtains, Blinds, and/or Shades
A Murphy bed, also known as a wall bed, is a great way to save space in your home. And, if you make it yourself, it can also save you money. To create your own Murphy bed, follow these simple steps below. Start by measuring the area where the bed will be installed. Next, decide on the dimensions of the box that will house the mattress and the sides of the walls that will support it; take into account your height limitations and any architectural details (such as fireplaces) or obstructions that might get in the way of installing a traditional headboard. Once you have figured out all this information, cut two pieces of plywood for each side of your Murphy bed using a power saw. newfashionlamp
Save Money By Making It Yourself
Building a murphy bed is a great way to save money. You can make it yourself for a fraction of the cost of buying one. Plus, it’s easy to do and only takes a few hours. Here’s how to build your own bed!
- Measure your mattress width and length, then measure the inside height of your desired location for the bed.
- Cut out 2 pieces of plywood at these measurements plus an inch or two.
- Set up 2x4s in a square around this area (8 feet x 8 feet should be enough). Use these as temporary supports for the walls. Drill holes through each stud about 4 inches from either end. The holes should be 4 inches in from each side so that they line up with those on opposite ends when we attach them together later on.
Conclusion
A Murphy bed is a great way to save space in your home, and it can be made relatively easily and cheaply with pallets. If you’re considering a Murphy bed, be sure to do your research and find the right size and style for your needs. With a little bit of effort, you can have a brand new piece of furniture that will make your home more functional and stylish.